Mask Machine Heating Ring Introduction:
1. One method involves threading alloy wire through small ceramic blocks, encased in a stainless steel shell.
2. It is not made by the conventional mica winding method, but by threading ceramic strips with wire. Therefore, the power of this product is 0.5 to 1.5 times higher than ordinary ones. The heating element is made of imported round wire ceramic wound into a spring shape and threaded into ceramic strips, with a stainless steel outer cover and high-temperature insulation cotton (aluminum silicate fiber board) in the middle to prevent heat leakage. The ceramic strips are high-frequency ceramics, characterized by fast heat transfer, hardness, resistance to breakage, high-temperature deformation, and aging.
3. Ceramic Heater is made of spiral resistance wire passing through specially designed high-temperature resistant ceramic tiles, precisely extended, bendable, with a beautiful metal shell and ceramic fiber insulation layer. It forms an effective high-temperature (up to 1000°C), high-power density band heater with flexible design for easy installation. Technical features: According to user requirements, voltage from 36V, 110V, 180V, 220V, 380V, maximum power load of 6.5W per square centimeter, energy consumption can be reduced by 30% compared to traditional electric heaters.
Mask Machine Heating Ring Product Description
1. This product can withstand temperatures up to 800°C for long periods, while ordinary ceramic rings crack at 500°C.
2. All materials of this product are high-temperature resistant: thickened high-temperature resistant outer cover, high-temperature resistant heating wire, high-temperature resistant 95 ceramic; ordinary ceramic rings are made of white porcelain.
3. The minimum inner diameter of this product is 50 mm, with no voltage limitation; it can be customized from 36V to 450V. Unlike traditional track heaters, which cannot be made for 220V when the surface area is less than 2000 square centimeters, causing inconvenience.
